|
View Enquiry Basket
Industrial Engineering Machines
| Leveraging on our state-of-the-art-infrastructure, we manufacture and export different types of industrial engineering machines such as hydraulic power presses, single spindle automatic lathe machines and automatic lathe machines that find usage in varied industrial applications. Our range include single spindle automatic lathe machines, hydraulic power press and others. Robustly constructed using the best quality components, these machines are stringently in compliance with the international quality standards. These industrial engineering machines are available in various types and specifications, our range of machines can also be customized as per the specific requirements of the clients. |
 
Hydraulic Power Presses Hydraulic power presses can be used in various applications like pressing, bending, straightening, punching, broaching and riveting etc. These can be used in production or maintenance. The specification may be altered as per individual needs.
- Heavy duty construction, rigid frame under full load, operated with built in or separate power pack through push button or foot switch
| Capacity | 6.3 to 200 tone | | Stroke | 50 to 500 mm | | Daylight | from 150to 800mm | | Table Size | from 300x300to800x1000mm |
| MODEL NO FORWARDCAPACITY | UNIT(TONNES) | BEW O6(6.3) | BEW 10 | BEW 16 | BEW 25 | BEW 40 | BEW 63 | BEW 100 | | RAM SRROKE | A'MM | 320 | 320 | 320 | 400 | 400 | 400 | 500 | | DAY LIGHT | B'MM | 500 | 500 | 500 | 63 | 630 | 630 | 800 | | THROAT | C'mm | 200 | 225 | 250 | 280 | 320 | 360 | 400 | | TABLE SIZE | D1'mm | 400 | 400 | 500 | 560 | 630 | 700 | 800 | | | D2'mm | 500 | 560 | 630 | 700 | 800 | 900 | 1000 | | TABLE HT FROM G.L | E'mm | 750 | 750 | 750 | 750 | 750 | 750 | 750 | | U'CUT OUT IN TABLE | F'mm | 100 | 100 | 120 | 120 | 140 | 140 | 140 | | T-SLOT | T'mm | T14 | T18 | T18 | T18 | T22 | T22 | T22 | | RAM AND THREADING | K'mm | M48X2 | M48X2 | M64X2 | M80X2 | M110X2 | M140X2 | M180X3 | | THREADING LENGTH | L'mm | 20 | 20 | 25 | 25 | 30 | 30 | 40 | | LOCATION Ø IN RAM | M'mm | 20 | 20 | 25 | 32 | 40 | 40 | 50 | | DP OF LOCATION Ø | N'mm | 40 | 40 | 50 | 60 | 75 | 75 | 100 | | GRUB SCREW SIZE | P'mm | M12 | M12 | M16 | M16 | M20 | M20 | M20 | | GRIB SW DIST FROM RAM END | R'mm | 25 | 25 | 28 | 40 | 40 | 40 | 50 | | OVERALL SIZE (APPROX) | - | - | - | - | - | - | - | - | | HIGHT | G'mm | 2160 | 2170 | 2275 | 2550 | 2600 | 2700 | 3080 | | WIDTH | H'mm | 750 | 750 | 820 | 850 | 900 | 960 | 1000 | | DEPTH | J'mm | 950 | 1125 | 1225 | 1550 | 1700 | 1975 | 2125 | | APPROACH SPEED | mm/sec | 19 | 12 | 18 | 22 | 70 | 70 | 50 | | PRESSING SPEED | mm/sec | 5 | 8 | 12 | 9 | 13 | 9.5 | 9.5 | | RETURN SPEED | mm/sec | 32 | 24 | 24 | 24 | 125 | 90 | 85 | | ELE.MOTOR CAPACITY | KW | 2 | 2(3) | 3(5) | 5(7.5) | 10 | 15 | 20 | |
 |
Add to Enquiry Basket  
Single Spindle Automatic Lathe Machine Our range of JADE - 25 single spindle automatic lathe machine somes with various salient features like main drive, headstock etc.
Features:
- Main spindle run-out within 5 micron.
- JADE-25 can easily machine stainless steels, HCHCr steels, EN-series steels besides brass and aluminum.
- Headstock: The Headstock and the end castings are mounted on the base of machine base. They contain the guide bars that serve to support the cross slide and additional attachments on the tailstock. Headstock is a robust one piece with large diameter spindle mounted on high precision bearings, to withstand heavy cuts and assure balanced true running over years.
- Main Drive: The standard main drive consists of a motor with 1.3/1.6kw which drive the main spindle through a jack shaft.Twelve diffrent speeds can be set by changing belts in jack shaft pulley.
- Cam Shaft Drive: Its is driven by means of separate motor of 0.37kw.A production rate from 28 to 2100 pieces per hour can be obtained by using a chain of change gears.
- Cross Slide Rest: A cross slide rest with front and rear slides is included in basic the machine. The base body of the cross slide is built sturdy to suit heavy cuts without vibrations. This is mounted on the guide shafts.
- Tailstock: It is placed on the guide shafts and can be moved to and fro in the longitudinal direction. The feed motion is controlled by a drum cam.
- Longitudinal Turning Attachment Front: For components which cannot be produced by plunge cutting,a longitudinal turning slide can be mounted on the cross slides. The sliding movement of this attachment is controlled by a drum cam on the cam shaft. The radial motion is performed by a two pin lever. Thus, stepped longitudinal operations can be made by utilizing two separate setting possibilities of the two cross movement or holding cams. Taper turning can also be done.
- Drilling and Threading Attachment: This attachment along with centering and stopping attachment helps to produce inner threads concentric with the outer diameter to the accuracy g6 order od 0.01mm. External threads of accuracy h7 are possible with this attachment.
| Round | 25mm | | Hexagon | 22mm | | Square | 18mm | | Stroke of Cross slide | 22mm | | Max.Capacity of Tailstock collet | 13mm | | Max.Tailstock travel | 100mm | | Spindle Speed (12 steps) | 550to4000rpm | | Production Rate | 28 to 2100pcs/hr | | Cycle Time | 1.7 sec/pc to 128.6 sec/pc | | Maximum Turning Lenth (with longitudinal turning slide) | 70mm | | Work Spindle Motor | 1.3/1.6kw | | Feed Drive Motor | 0.37 Kw | | Net Weight of machine | 650 Kgs (approx) | | Packing Dimension(Seaworthy) | 1.95X1.0X1.7meters | | Gross Weight (seaworthy) | 1200kg | |
|
Add to Enquiry Basket
|
Showcase
View all our products / services as a slide show.
Play Now
 
|
© Bholanath Precision Engineering Pvt. Ltd., All Rights Reserved. (Terms of Use)
